ASUS ProArt PA401 Wood Edition Mid-tower ATX Casing

ASUS ProArt PA401 Wood Edition Mid-tower ATX Casing

The ASUS ProArt PA401 Wood Edition Mid-tower ATX Casing crafted to blend style, sustainability, and usability into a PC build that works as well in a studio or home office as it does in a gaming den. Drawing attention from its front panel, which is made of FSC-certified ash wood finished through a careful multi-stage process, it radiates a natural elegance while still looking clean and modern. With dimensions around 412 × 225 × 503 mm and a weight of about 8.6 kg, it carries a solid and robust presence without being overbearing. Inside, there’s enough room to accommodate full-size ATX motherboards while still supporting smaller Micro-ATX or Mini-ITX boards. Even large graphics cards up to about 315 mm in length fit comfortably. CPU cooler height is limited to roughly 160 mm, which is enough for many air coolers but suggests checking height if going for huge towers. Cooling is well thought out: two large 160mm fans at the front intake combined with a 120 mm exhaust in the rear help pull air through, aided by a front grille with good porosity to reduce restriction. There’s also a PWM fan hub included for easier control of fan speeds. The side panel is tempered glass (in the version you asked about) so you can display the internals, while still locking mechanisms are present to keep everything secure. Storage options are versatile: combination bays for HDDs/SSDs, separate 2.5-inch bays, meaning you can mix and match depending on what drives you need. Cable routing and management are aided by rear cable clips and tool-free mechanisms for easier installation. On the front I/O you get modern ports including a fast USB-C port (20 Gbps), a couple of USB-A, plus audio, with fan speed mode switching and even a lock for power/reset buttons to prevent accidental presses. For someone wanting a case that makes a statement without shouting, that balances looks and performance, the PA401 Wood Edition (tempered glass version) is especially compelling. It’s ideal for builds where aesthetics matter, where moderate cooling is sufficient, and where you want good flexibility in component choices without needing the very largest GPU or radiator setups.

Features Of ASUS ProArt PA401 Wood Edition Mid-tower ATX Casing

• FSC-certified ash wood front panel finished via a six-step process for durability and aesthetics. 
• Front grille offers about 33% porosity to maximize airflow through the case. 
• Comes with two 160 mm front intake fans and one 120 mm rear exhaust fan preinstalled. 
• Includes a PWM fan hub supporting up to 5 fans for centralized control. 
• Side panel made of tempered glass in this version, allowing visibility into components. 
• Supports ATX, Micro-ATX, and Mini-ITX motherboards for flexible build options. 
• Maximum GPU length of ≈ 315 mm, fitting many current graphics cards. 
• CPU cooler height clearance up to ≈ 160 mm. 
• Radiator support up to 240 mm (top and front mounting options). 
• Removable dust filters at bottom and front for easier cleaning. 
• Front I/O includes one USB-C (20 Gbps), two USB-A 3.0, and headphone/microphone jack. 
• Power/reset buttons have a lock to avoid accidental presses.